How to duplicate Toyota Key Yourself

04-05-2020 - The list bellow describes the models and year of Toyota/Lexus in which you have an interface to duplicate keys yourself.

Note - Although it seems pretty easy to program a duplicate Toyota/Lexus transponder key, a non experience personal might runs in to many issues onsite, especially if the locks in the vehicle are not the original one, if the key is not an original, used or damaged.

It is actually way more convenient and affordable to hire an experienced locksmith who will be able to provide the right blank transponder key cut and program it.

• Toyota Tacoma - 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013
• Toyota Echo - 2000 2001 2002 2003 2004 2005
• Toyota Sienna - 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010
• Toyota Corolla - 2003 2004 2005 2006 2007 2008 2009 2010
• Toyota Matrix - 2004 2005 2006 2007 2008
• Toyota Celica - 2000 2001 2002 2003 2004 2005
• Toyota Camry - 2000 2001 2002 2003 2004 2005 2006
• Toyota 4Runner - 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009
• Toyota Prius - 2001 2002 2003
• Toyota FJ Cruiser - 2007 2008
• Toyota RAV4 - 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010
• Toyota Solara - 2004 2005 2006 2007 2008
• Toyota MR2 - 2000 2001 2002 2003 2004
• Toyota Tundra - 2004 2005 2006
• Toyota Avalon - 2003 2004 2005 2006 2007 2008
• Toyota Highlander - 2001 2002 2003 2004 2005 2006 2007

How to program Toyota TOY43/Lexus TOY40BT4 key

1. Check the list above to see if your Toyota/Lexus has an interface to duplicated keys on board.
2. Get a cut Toyota transponder key on the internet matched to your master key.
3. Sit down behind the driver’s seat and press then release both the brake and gas pedals at the same time.
4. Insert an existing functional master key into the ignition keyhole (don’t turn it) and pull it out within less then 15 seconds.
5. Push and release the gas pedal five times.
6. Within 20 seconds push and release the brake pedal six times.
7. Pull out the master key from the ignition.
8. Insert your new transponder key to the ignition without turning it.
9. Push down on the gas pedal one time.
10. Wait up to two minutes until your dashboard security light turns off.
11. Take out the new key and press your brakes once.
12. The new transponder chip key should be programmed.